Liquor cabinet ikea can be attractive and functional, and it is a relatively easy project to complete. Not only does a liquor cabinet serve to keep your bottles organized, but it also prevents children from getting into them if they are stored in an ordinary kitchen cabinet near the floor.
Measure the height and width of some of your liquor bottles using a tape measure to get an idea of how deep to make your liquor cabinet ikea and at what height to install the shelves. Sketch a picture of your proposed liquor cabinet uses the measurements you just took. Cut five sheets of 3/4-inch plywood using a table saw to construct the basic framework of your cabinet. Arrange the top, bottom and side panels in a rectangle shape with the discs are placed upright on the floor along their longest narrow edges. Fix the frame by driving a half-inch wood screw through the upper and lower panels of the side panels. Place the rear panel flat on top of the frame you just built, directing all the outer edges.
Cut sheets of half-inch plywood to the correct size for your shelves and divider. Push the cabinet dividers vertically in place between the top and bottom panels and secure them in place by running 1 1/2 inch wood screws through the top, bottom and back panels of the divider. Fit the door on the front of the cabinet by attaching two metal hinges to the door and the cabinet frame. Paint or stain your liquor cabinet ikea as desired, and cover it with a coat of clear varnish to protect against water damage.Tags :