Installing IKEA Wall Anchor : IKEA Wall Anchor Design

Keep masonry piece perpendicular to the wall and pull the trigger. Hold the drill firmly and apply sufficient inward pressure on the back of the drill until you reach the desired depth. Suck the powder within the hole with a wet / dry vacuum. Fill the hole with 100 percent silicone caulk and then slide the IKEA wall anchor in the hole. The seal will fill the hole and protect it from moisture, but will still allow you to remove the screw from the anchor if necessary. The anchor fits tightly if you used the right masonry drill bit and kept straight. If necessary, tap the anchor into the wall with a hammer.

This digital photography of IKEA Wall Anchor Design has dimension 1280 x 720 pixels, you can download and obtain the IKEA Wall Anchor Design digital photography by right click on the right click to get the high-res version.

Here is important science on Good IKEA Wall Anchor. We have the prime method for Good IKEA Wall Anchor. Check it out for yourself! You can get IKEA Wall Anchor Design guide and read the latest Installing IKEA Wall Anchor in here.

Back to Installing IKEA Wall Anchor

Comments are closed.